Harmonic Resolution Systems from Tri-Cell Enterprises

Quick Links
PRODUCTS - back to all products
Email Tri-Cell - send us your email

Harmonic Resolution Systems is dedicated to producing high performance products that will allow you to fully enjoy the experience of accurately reproduced music and video.

Their products significantly reduce structural-borne and air-borne vibration over the entire frequency range of any audio/video system.

Many years of engineering experience, custom material development, and listening tests have resulted in a product line that enables your audio/video source and amplification components to achieve peak performance.
Individually, HRS products produce significant improvements in signal quality as if you had made a significant upgrade to your component. Used as a system, the changes will redefine what you thought were possible.

M3 Isolation Base

The M3 Isolation base significantly reduces the negative impact of structure-borne vibration on your audio component performance. It minimizes input vibration, provides significant levels of isolation, and maximizes damping of residual energy.

This unique design utilizes six different materials to optimize stiffness, geometry, mass, and impedance characteristics. Each material is carefully selected for optimum performance and functionality. The M3 Isolation Base also uses two different proprietary HRS elastomer formulations. The first was developed to maximize isolation efficiency and the second was developed to maximize dissipation of residual energy.

A finely polished granite contact plate is used in the M3 design to directly support your audio component providing exceptional beauty and years of scratch resistant service. The M3 Isolation Base is produced in four standard sizes. Each size can be purchased in any of the four different load ranges to optimize component performance. The standard color is black, but inquires for custom colors, sizes, and load ranges are welcome.

Photos from CES Expo 2003 - Tri-Cell and Harmonic Resolution

Damping Plate

The HRS Damping Plate significantly reduces the negative impact of air-borne vibration and residual structural-borne vibration on your audio or video component performance. The HRS Damping Plate should be placed directly on top of an electronic component chassis with the soft side (a custom formulated elastomer) of the damping plate in contact with the electronic component chassis surface. The greater the surface area covered by the damping plates, the greater the improvement in audio/video performance.

HRS Damping Plates are produced in various sizes to allow you to create the optimum configuration for your component(s). All visible surfaces are made from a precision machined billet aircraft aluminum with a black anodize finish.

The HRS Damping Plate is also effective at damping structures and speaker cabinets to reduce structural resonance.

Analog Disk

The Analog Disk significantly reduces the negative impact of air-borne and structure-borne vibration on your turntable performance. The Analog Disk should be placed directly on the record with the soft side (a custom formulated elastomer) in contact with the record label and turntable spindle. It is 3.25" (8.25 cm) in diameter and 1.35" (3.43 cm) in height.

HRS Nimbus

The HRS Nimbus absorbs high frequency structure-borne vibration and prevents it from reaching your audio component. Placing the Nimbus under each foot of your audio component provides a barrier from the harmful effects of high frequency noise. The Nimbus is made from billet machined aircraft aluminum and a proprietary elastomer formulation that maximizes energy dissipation. It can be used to support any component regardless of weight. Nimbus can be stacked to tune the natural frequency of your system or increase high frequency energy dissipation.