Dynavector is highly regarded as a manufacturer of high performance moving coil cartridges and Super-Stereo based on advanced theory and unique production technology

At whatever price point the audiophile can be guaranteed of a Dynavector MC cartridge that will both move and excite the listener to new heights of listening pleasure. A pleasure that for many only comes from a genuine analogue source.

DRT XV-1s                  Specifications

• The magnet circuit comprises 8 small ALNICO magnets.

• On the front yokes, magnetic stabilizing coils are wound.

• A revolutionary square shaped front aperture with a matching square shaped armature.

Dynavector continue to research and have pushed the boundary further with the XV-1s. Although the specifications remain the same a significant up upgrade in both magnetic and body parts achieve a startling improvement in imaging, along with a smooth as silk extension over the entire frequency range.

The XV-1s is the latest evolution of Dynavector design and features the advanced multi magnet design that stabilizes the magnetic flux density between the front yoke and the equalizer component, around the air gap.

The XV-1s also features a revolutionary square shaped front aperture with a matching square shaped armature this enables the moving coil wound armature to move in an equalized and stable magnetic flux.

Although slightly smaller in dimension the front yoke aperture is also square shape to match the armature along with a square shaped counterbore to the equalizer component part.

DRT XV-1                  Specifications

• The magnet circuit comprises 8 small ALNICO magnets.

• On the front yokes, magnetic stabilizing coils are wound.

Dynavector decided to fight back in order to protect the vast existing stock of recordings in analogue media, by producing a cartridge capable of musical reproduction above, or at least equal to any digital source. The XV-1cartridge was designed to meet this ambitious brief and has succeeded in providing the finest analogue reproduction possible. Listening to the XV-1 it is evident that here is the finest cartridge in the world.

The XV-1 has been awarded 'Golden Ear Award 2001' in the Absolute Sound magazine for its highly advanced technology.

At a glance, the XV-1 is different from all cartridges that have gone before. The magnetic path is divided into two - In the magnetic gap, a specially designed magnetic flux equalizing piece is placed. On the front yokes, magnetic stabilizing coils are wound. By this special combination, the magnetic field becomes widely homogeneous and more linear than the conventional magnetic design that is common in existing MC cartridges. Currently the design trend of MC cartridges is to employ stronger and harder magnets. The XV-1 takes the opposite approach. This is the theoretical conclusion of Dynavector. 

The result? - deeper and more accurate bass, brighter but much smoother treble and better L/R separation. Very low distortion, especially of 3rd harmonics, results in a life-like musicality and ease of reproduction impossible using normal MCs. After hearing the music produced by the XV-1 even 'high-end' CD players sound thin, lacking any real deep bass. This cartridge handles the smooth string note and heavy dynamics of big orchestral works like Prokofiev, Schostakovich, Mahler etc. with unique ease, to bring the full glory of analogue recordings to the listener who wants the very best possible sound from their stock of LP records.

Te Kaitora                                     Specifications

• Low Output with Boron cantilever and silver wire.

The Maori name gives away the fact that Te Kaitora is a collaboration between Dynavector New Zealand and Dynavector Japan. Dynavector New Zealand have been responsible for a range of high quality pre amps, power amps and phono stages. They encouraging Dynavector Japan to build a no holds barred cartridge. Te Kaitora is the result. 

It is a nude design, that is it has no cover. This helps keep weight down, removes the chance of information losing vibrations and does not allow dust to collect as is possible in enclosed designs

A titanium headblock is used for lightness and rigid construction. The Te Kaitora has a 6mm long solid boron cantilever fittied with Pathfinder line contact stylus. The coils are of very fine silver wire wound using Dynavector founder Dr Tominari's own design of coilwinding machine. This set up gives a good output level of 0.25mV with a very light and agile coil assembly which leads to secure tracking and a 'quick' sound. 

On the frontyoke there is another coil which is Dynavectors flux damper. Another unique feature to Dynavector is their softened magnetism, ferrous metal strips arranged to alter the magnetic field. These two features combine to eliminate the distortion caused by excess magnetic flux produced by the high energy magnets used in modern cartridges. 

A compliance of 10 CU and weight of 8.8 grams make it compatible with arms from Well Tempered, Linn, Naim, SME and others.

DV XX-2                                          Specifications

• Low output moving coil cartridge with Alnico magnet and Flux damper

The DV XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.

The XX-2 also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs. This can be accredited to not only Dynavector's skilled assembly techniques but also a meticulous attention to design, materials, and engineering expertise.

DV KARAT 17D2 MKll                  Specifications

• Low output moving coil cartridge with flux damper and softened magnetism

17D2 MKll 'Karat Diamond' is the first cartridge built using 'dispersion' theory. Its Micro-Ridge stylus and very short (1.7mm long) solid diamond cantilever give a reduction in 'dispersion' along with improved high frequency extension all the way up to 100KHz. The latest Dynavector's patented magnet circuit design achieved higher output of 0.26mV with crystal clear mid-range and treble even during the largest symphonic crescendos.

DV-20X H/L                                      Specifications

• Low output moving coil cartridge with Alnico magnet and Flux damper

TDV-20X has a solid aluminium-alloy body similar to the XX-2. This makes a rigid platform for the cartridge motor and aids secure fitting to the arm. The cantilever is a 6mm length hard aluminium pipe cantilever with a perfect elliptical nude diamond stylus. 

The magnetic flux damping and softened magnetism along with powerful Neodymium magnet gives out the 20XH a healthy 2.8 mV output at a suitable impedance for most MM inputs. The 20XL has an output of 0.3 mV ideal for most MC phono stage.

DV - 10X5                                         Specifications

• High output moving coil cartridge with flux damper and softened magnetism

The Dynavector 10X series High Output Moving Coil cartridge debuted in 1978 winning the prestigious Design and Engineering Award at the Chicago CES in both 1978 and 1981. The 10X series cartridges are also widely accepted at the benchmark in High Output moving coil cartridge at this price point and beyond.

With the introduction of the new 10X5 High Output moving coil there is no doubt Dynavector will retain this enviable position and again set the standard for high output moving coil cartridges.

P-75 Head Amp          Specifications

• Suitable for all conventional stereo cartridges

• User friendly adjustments - No soldering or extra components required

• Patented Dynavector Phono Enhancing circuit

• Unique ultra low noise power supply

The P-75 also includes the patent P E (phono enhancing) circuit designed by Dr Tominari to dramatically improve the performance of low output moving coil cartridges.

By a simple arrangement of jumper settings all conventional, MM, MI, high and low output cartridges are catered for.

The P-75 also has an advanced power supply that operates from a conventional 12V AC to DC adaptor. This adaptor has absolutely no bearing on the sound quality. The P-75 power supply runs at over 1/4MHz. It takes the low grade single voltage DC supply from the ac adapter and converts it to the dual high voltages required for true professional quality audio reproduction. The operating frequency is over 12 times higher than the top of the audio band and it incorporates super low noise wideband regulators in its output stage to give ultra low noise supply rails. The internal P-75 power supply is totally self contained and stores many times the maximum possible energy requirements for the phono amplifiers. This means that the quality or size of the external ac adaptor is irrelevant. Increasing the capacity of the external supply will make no difference to the quality of the sound.

Like all Dynavector products the P-75 whilst innovative carries on our proud tradition of faithfulness to the heritage of phonographic recordings, exhibiting clear, full-bodied, distortion free sound that analog enthusiasts require.

DV PHA-100 Head Amp          Specifications

• Current Maximizing phono amplifier Output voltage

The Dynavector phono head amplifier PHA-100 is a complete redesign of our original head amplifier the PE-1, using new circuitry and the most advanced and highest quality IC's resistors and capacitors currently available.

Current maximizing head amplifier for the low output MC cartridge
The PHA-100 makes use of a unique patented circuit designed to provide the maximum fidelity from vinyl sources. By using the patented current amplification, magnetic distortion of MC cartridge can be reduced considerably. You can easily recognize the sound quality is different from any other head amplifier or step-up transformer.

Cartridge impedance matching
The PHA-100 has an impedance selection switch to provide the correct match for either low or medium impedance MC cartridges.
You can easily select the position suited to your cartridge.
Position 1 ---- 4 - 7 ohms
Position 2 ----30 - 40 ohms.

The high class electronic devices and the high-grade connectors
All the electronic devices are selected by the several listening tests. R core antistatic transformer is being used to avoid the noise.

DV 507MKII Tone Arm          Specifications

• Bi-Axis inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone arm

High precision all stainless steel bearings. The use of precision stainless steel bearings give superb dynamic sensitivity and a stabilized tracking performance without any deterioration through ageing.

Non-contact electro magnetic damper. The use of new type damper with a powerful Neodymium magnet gives better damping and ensures that any adverse effects on tracking performance are minimized.

Large arm lift - A larger arm lift gives a stable lift action which maintains its performance over long periods enabling cartridges to be raised and lowered without stress.

Chuck type locking headshell plug in connector - The use of a new type of plug-in connector ensures that good contact is maintained with the headshell contact pin during long-term use.

New style headshell - The new style headshell is suitable for use with a wide variety of cartridges. It is machined from aluminium alloy and has an EIA standard connector. This allows the cartridge to be rigidly mounted.

High-quality arm cable - A machined aluminium connector is used. The 5 PIN connector conforms to the DIN standard.