|
In the Belvedere it was decided to use a
spring floating system to improve sound qualities. The springs used here
are not the cheaper soft kind found in most of the sprung tables. They
are made of hardened, stiffer stainless steel. |
The Bellagio is Bluenote's
reference on springs floating turntable, it is the latest step in
performances. The sound of Bellagio has got the most powerful,
detailed, focused, opened sound of all Bluenote turntables. Such great
performances are obtained, in particular, for its high and perfectly
balanced mass, its innovative decoupling systems & curved board shapes
and the very fine quality of its bearing/spindle sytem, all enable this
turntable to incredibly well dissipate and control vibrations and rotation
stability. |
The Piccolo is Bluenote's entry
level acrylic Turntable sold as package including Bluenote's B-5 on bearings
tonearm and Bluenote's MM6,5 cartridge. (The picture shows only the U-3 tone
arm)
It is made with a 15mm thick transparent acrylic board and 20mm thick acrylic
platter the bearing is derived directly from Bluenote's Bellavista Turntable.
Acrylic Dust Cover is offered only as Optional |
The Deck 12 is a Rigid belt driven
turntable with a Very open sound, detailed and with a full body.
Its 20mm thick platter is made of transparent polyvinyl to have a good
rotational stability and to dissipate vibrations.
All the parts are made actually of machine worked alluminium, brass,bronze,
stainless steel, all to improve sonic performances. |
| |
| Phono Amps |
|
|
|
Villa -- De Medici
phono amp |
Villa -- Pamphili
phono amp |
I.A.V -- Phono 1 MM or MC
phono amp |
|
 |
 |
The Phono 1 is a MM or MC phono preamplifier with a very
high acceptance able to match almost the cartridges present on the market.
The Phono 1 sound is detailed and delicate, open and natural.
It requires burn in to extend |
|
FREQUENCY
RESPONSE: 20Hz - 20KHz @ +/- 1dB
THD (Total Harmonic Distortion): 0,02% @ 20Hz - 20KHz
MC INPUT IMPEDANCE: 470ohm + resistors to adjust load
MM INPUT IMPEDANCE: 47Kohm
MC INPUT SENSITIVITY: From 0,1mV to 0,5mV var. acceptance
MM INPUT SENSITIVITY: From 0,6mV to 5,0mV var. acceptance
MC GAIN: >70dB on all RIAA diagram
MM GAIN: >48dB on all RIAA diagram
RATIO SIGNAL TO NOISE: -85dB =>P
DIMENSIONS: 100mm L x 120mm H x 270mm D
WEIGHT: Kg. 4,00 |
FREQUENCY
RESPONSE: 20Hz - 20KHz @ +/- 1dB
THD (Total Harmonic Distortion): 0,01% @ 20Hz - 20KHz
MC INPUT IMPEDANCE: 470ohm + resistors to adjust load
MM INPUT IMPEDANCE: 47Kohm
MC INPUT SENSITIVITY: From 0,1mV to 0,5mV var. acceptance
MM INPUT SENSITIVITY: From 0,6mV to 5,0mV var. acceptance
MC GAIN: >70dB on all RIAA diagram- MM GAIN: >48dB on
all RIAA diagram
RATIO SIGNAL TO NOISE: -89dB => P.
DIMENSIONS: 100mm L x 120mm H x 370mm D
WEIGHT: Kg. 9,00 |
FREQUENCY
RESPONSE: 20Hz - 20KHz @ +/- 1dB
THD (Total Harmonic Distortion): 0,05% @ 20Hz - 20KHz
MC INPUT IMPEDANCE: 470ohm + resistors to adjust load
MM INPUT IMPEDANCE: 47Kohm
MC INPUT SENSITIVITY: From 0,25mV to 0,7mV var. acceptance
MM INPUT SENSITIVITY: From 0.8mV to 5,0mV var. acceptance
MC GAIN: >60dB on all RIAA diagram MM GAIN: >40dB on all
RIAA diagram
RATIO SIGNAL TO NOISE: -78dB =>P
DIMENSIONS: 110mm L x 110mm H x 210mm D
WEIGHT: Kg. 2,00 |
|
| |
| Cartridges |
|
|
|
|
Villa -- Boboli Cartridge |
Villa -- Baldinotti |
 |

|
|
High Output Moving Coil Cartridge (can be
driven by MM Phono Stages)
Frequency response: 18Hz - 38000Hz
Output Voltage: 2,5mV
Separation channel: >28dB
Stylus pressure: 1,8gr. +/-0,5
suggested
Load resistance: 47Kohm
Weight: 9gr |
Moving Coil
Cartridge
Frequency response: 15Hz - 45000Hz
Output Voltage: 0.3mV
Impedance: 50ohms
Separation channel: >30dB
C.S.D.: <1dB @ 1KHz
Stylus pressure: 2,5gr. +/-0,5 suggested
Load resistance: not less than 100ohms
Weight: 12gr. |
| |
| Tonearms |
|
|
|
|
Villa -- Borghese |
Villa -- Borromeo |
Villa -- Bellaria |
I.A.V. -- U3 |
 |
 |
 |
 |
- Unipivoted
tonearm total length 270mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: stainless steel
- Shaft: 23mm (standard Rega)
- Mass: medium
- VTA: adjustable on Shaft
- Lift: manual two positions
- Anti Skating: with counterweight position
- Azimuth: adjustable thru counterweight
- internal cables: awg32 Hyper Litz shielded
- external cables: tasker® shielded |
- Unipivoted
tonearm total length 265mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: stainless steel
- Shaft: 23mm (standard Rega)
- Mass: medium-high
- VTA: adjustable on Shaft and on Pivot Tower
- Lift: hydraulic & adjustable
- Anti Skating: wire
- Azimuth: adjustable on counterweight
- internal cables: awg36 Hyper Litz shielded 99,9999% Oxigen Free Copper
- external cables: Custom Made shielded Silver/Teflon® cable |
- Unipivoted
tonearm total length 265mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: TITANIUM - Shaft: 23mm (standard Rega)
- Mass: medium-high
- VTA: adjustable on Shaft and on Pivot Tower
- Lift: hydraulic & adjustable
- Anti Skating: wire
- Azimuth: adjustable on counterweight
- Internal cables: awg36 Hyper Litz shielded 99,9999% Silvered Oxygen Free
Copper
- External cables: Custom Made shielded Silver/Teflon® cable |
- Unipivoted
tonearm total length 270mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: stainless steel
- Shaft: 23mm (standard Rega)
- Mass: light- VTA: adjustable on Shaft
- Lift: not available
- Anti Skating: with counterweight position
- Azimuth: adjustable thru counterweight
- internal cables: awg32 Hyper Litz shielded
- external cables: tasker® shielded |
| I.A.V. --
B5 |
I.A.V. --
U3 |
 |
 |
- On Bearing
pivoted tonearm total length 265mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: Black Anodized Aluminum - Shaft: 23mm (standard Rega)
- Mass: medium
- VTA: adjustable on Shaft
- Lift: manual 2 position with arm rest on the same board
- Anti Skating: not available
- internal cables: awg36 Hyper Litz shielded
- external cables: tasker® shielded |
- On Bearing
pivoted tonearm total length 265mm
- Length Shell/Pivot: 233mm (standard Rega)
- Pivot: Black Anodized Aluminum - Shaft: 23mm (standard Rega)
- Mass: medium
- VTA: adjustable on Shaft
- Lift: hydraulic & adjustable
- Anti Skating: wire
- internal cables: awg36 Hyper Litz shielded silvered
- external cables: tasker® shielded |
| |
| Amplifiers |
|
|
|
|
Villa--Demidoff Signature
Power Amp |
I.A.V --
Steroid 1
Integrated Amp |
I.A.V -- Steroid 1Signature
Integrated Amp |
I.A.V -- Soundmaster
Limited Edition |
|

|
 |
 |
 |
|
The DEMIDOFF SIGNATURE is a Single Ended Stereo
Integrated Amplifier made with a solid state perfectly matched Darlington
power section. It is a 50 watt per channel amplifier put in a 5mm thick
totally diamagnetic chassis and a stainless steel cover. The design of this
amp is been based on the use of a huge inductive power supply made with 4
hand made manufactured power transformers plus 8 transformers dedicated to
decoupling the AC Voltage from the amplifier itself.
Details on the Demidoff (-regular)
The DEMIDOFF is a Single Ended Stereo Integrated Amplifier made
with a solid state perfectly matched Darlington power section. It is a 50
watt per channel amplifier put in a 5mm thick totally diamagnetic chassis
and a stainless steel cover. The design of this amp is been based on the use
of a huge inductive power supply made with 4 hand made manufactured power transformers
plus 8 transformers dedicated to decoupling the AC Voltage from the
amplifier itself. All components are specially selected for their sonic
performances including the volume control carefully matched in any unit. |
The Steroid 1 is a Stereo
Integrated Amplifier with 4 inputs and 25 watt per channel into 8ohms. It is
totally diamagnetic and is hand wired with rectangular solid core OFC bars (RSB).
The front panel is made with Polished black Acrylic.
This amp is a new simple way, to realize solid state amp sounding like good
(very good) tube amps with twice their power. The Steroid 1 sound is open,
natural and realistic quite like very expensive amps. |
The Steroid 1 Signature is a Dual Mono Stereo
Integrated Amplifier with 4 inputs and 25 watt per channel into 8ohms. It is
totally diamagnetic and is hand wired with rectangular solid core OFC bars (RSB).
The front panel is made with Polished black Acrylic.
It is hard to describe our super bargain amplifier. This amp is a new,
apparently simple way, to realize solid state amp sounding like good (very
good) tube amps with twice their power. |
The Sound Master is a Stereo
Integrated Amplifier with 4 inputs and 35 watt per channel into 8ohms. It is
totally diamagnetic and is hand wired with rectangular solid core OFC bars (RSB).
The front panel is made with 10mm thick painted plate of aluminum.
This amp is a new, apparently simple way, to realize solid state amp
sounding very powerful and detailed without lacking delicacy. The sound is
still very natural even if when power demanding is high. The realism of the
Sound Master is quite like very expensive amps. |
| |
| Speakers |
|
|
|
|
I.A.V. A-6
Pair of Floorstanding Reflex Loudspeaker 3 drivers - Real Italian Walnut
piano lacquer.
Power handling 350watt - 88dB – 8 ohm.
Tweeter 28mm soft dome – 2 Woofer 130mm treated paper.
40Hz/20000Hz +/- 1,5dB
Separated chamber of 18 litres fill able with camping materials for fine
tuning
Packed weight Kg 35,00 pair
Dimensions (19x19x100 cm LxDxH) Available in other lacquered Colors.
Dedicated to people want to listen to more powerful bass. This speaker has
just the same construction of the A-3 but in a 1000mm tall cabinet. |
I.A.V. A-3
The A-3 is a Bookshelf Loudspeaker with 2 ways 2 drivers made of Real Italian
Walnut wood piano lacquer.
The most interesting shoe box speaker ever made since the 1973 BBC monitor.
The relative low price of A-3 is not to be intended as a limited value.
Power handling: 150watt - Efficiency: 86dB - Impedance: 8 ohm
Tweeter: 28mm soft dome - Woofer: 130mm treated paper - Frequency response:
50Hz/20000Hz +/- 1,5dB
Dimensions: (19x19x30 cm LxDxH)
Packing weight: Kg 12,00 |
I.A.V. C-4
Center channel 3 drivers shielded
Real Italian Walnut piano lacquer
Power handling 150watt - 88dB
4 ohm
Tweeter 28mm soft dome
2 Woofer 100mm treated paper
50Hz/20000Hz +/- 1,5dB
Dimensions (43x19x19 cm LxDxH)
Packed weight Kg 9,00
Available in other lacquered colors-blue, yellow and orange
|
Villa -- Reale
Pair of Reflex Floorstanding Shielded Loudspeaker
Made of tubular polished aluminum 150mm diameter, height 1100mm
2 ways - 4 drivers– 87dB – 350watt power handling - 8 ohm
Tweeter 28mm soft dome
2 Woofer 100mm treated paper
1 Woofer 130mm treated paper
40Hz/20000Hz +/- 1,5dB – Xover 2500 Hz
Packed weight Kg40,00 pair
This speaker is an unusual design because we created a push pull of
mid-woofers realized with "3" different (even in size) drivers. The
sound of this stylish speakers (can virtually fit for its shape any room) is
open, super fast and powerful. |
|
|
|
CD
Players |
|
|
|
Villa --
Stibbert
CD PLAYER |
|
|
 |
|
|
|
Totally floating Integrated CD Player - Double power
supply - Diamagnetic double chassis made of hi density Acrylic - No Over-sampling
integrated DAC - RCA coaxial digital input - XLR Balanced + RCA Unbalanced
analog outputs |
|
|
|
|
|
|